Modular Ashtray / Change Drawer Front

Looking for a good place to place a *RAM mount, secure a flash light, clip a walkie talkie, or any other number of daily necessities? Our replacement ash tray front mounts to factory holes and allows you to add any number of accessories. The slots are sized for 2020 T nuts, or you can use standard nuts and washers as well. Powder coated glossy black, made out of .090” 5052 Aluminum, and designed and manufactured in the USA.

Note: Be sensible when mounting items to this. While this has been tested with a RAM mount and a large phone, I have not tested it to failure….I try not to damage my trucks intentionally. I do not recommend putting heavy, or dangerous objects on this panel.

To mount, remove the ash tray from your dash, remove the 2x PH1 Phillips screws from the bottom and unclip the factory front. Hook the top lip of the new front to the ash tray, line up the holes, and reinstall the screws. Over tightening may cause the screws to strip out the plastic; if that happens, find a larger diameter screw and screw in place. Now just push the ash tray back in, and you're set!

I do recommend taking a bit of tape and layering it around the rails of the ash tray (to function as a shim) before reinstalling. This takes up any slop in the rail and makes a much more secure mounting position.

*RAM mount not included.